The Future of Cutting Tools China Carbide Inserts and Beyond

Deep hole drilling inserts are used to create precise and accurate holes in a variety of materials. The cutting speed, or feed rate, Cemented Carbide Inserts of the insert is a critical factor in the drilling process. If the feed rate is too high, the cutting edge of the insert will be worn down more quickly, resulting in poor hole quality and shorter tool life. Conversely, if the feed rate is too low, the cutting process will take longer than necessary.

The recommended feed rate for deep hole drilling inserts depends on a variety of factors, including the type of material, the hardness of the material, and the size of the cutter. Generally, a feed rate of 0.1 to 0.4 mm per revolution is recommended for mild steel, while a feed rate of 0.05 to 0.2 mm per revolution is recommended for stainless steel. For harder materials, a feed rate of 0.01 to 0.05 mm per revolution is typically recommended.

In Lathe Inserts addition, the feed rate should be adjusted based on the size of the cutter. For example, a 4 mm cutter should be fed at a rate of 0.2 to 0.3 mm per revolution, while a 12 mm cutter should be fed at a rate of 0.04 to 0.07 mm per revolution. It is important to keep the feed rate as low as possible, as this will help to ensure that the quality of the hole is not compromised.

When choosing a feed rate for deep hole drilling inserts, it is important to consider the various factors mentioned above. By selecting the right feed rate for the job, the cutting process will be more efficient and the hole quality will be improved. As a result, the tool life of the cutting insert will be maximized.

The Carbide Inserts Website: https://www.cuttinginsert.com/pro_cat/tungaloy/index.html